Water Pumping

Water pumping

From off-grid residential to agricultural needs Matrix Energy can provide the components or a complete system to meet your water pumping needs powered by photovoltaics or wind generators.

Pumping systems using battery storage are called "Demand" systems while all other pumping systems are called "Simple" systems. In a Demand system a charge controller regulates the amount of current entering the batteries, and protects them from overcharging or over-discharging. In a Simple system, the pump controller regulates the amount of current and voltage entering the pump itself, to ensure optimum performance. If you need water at times when the sun isn't shining then there are two options - chemical storage, where the power system keeps the battery bank charged, which in turn powers the pump on demand and mechanical storage where the water itself is stored in a reservoir.

Shurflo water pump Shurflo Submersible Pump Ideal for low volume pumping from deep wells, lakes or ponds to a cistern, the SF-9325 is capable of pumping 80 gallons per hour in full sun and from depths up to 230 feet. Designed to fit in a minimum 4" well casing, the 9325 pump works on 12 volts or for maximum performance, 24 volts. Electrical connections are made through a watertight submersible gland, so the cable can be disconnected from the pump without severing the wires. Features include a durable polymer housing and stainless steel fasteners, connects to 0.5" ID tubing and is field serviceable with replacement motors, seals and valves. Use with optional SF-9022 to increase pump output up to 30 % in low light conditions. One year warranty.

# 14-47-002
Option: # 14-47-001 Pump controller

12 Volt 
 
24 Volt 
Flow Rate* (litres/ hr) 
Motor Draw (amps) 
Total Head (meters) 
Flow Rate* (litres/ hr) 
Motor Draw (amps) 
195
1.8
20
405
2.1
185
2.1
30
390
2.6
175
2.6
40
380
3
176
3
50
370
3.3
155
3.4
60
345
3.8
145
3.9
70
305
4.1

*Solar Direct


Shurfo Pentair Water PumpsFor heavy duty applications this 45 PSI pressure pump, has cooling fins to keep it running efficiently. Self priming to 12 ft (3.7 m) this pump delivers up to 3.6 GPM also features a one way check valve to prevent reverse flow. 12 or 24 volt.

PSI 
10
20
30
40
GPM 
2.9
2.6
2.3
2.07
L/ min Amps 
11 5.6 
9.8 7.1 
8.7 8.4 
7.8 9 


# 14-47-007
3.6 GPM, 12V
# 14-47-008 3.6 GPM, 24V

As above but non-heavy duty version. 3 GPM, 12 or 24 V
# 14-47-009
Low volume pressure pump, 12 V
# 14-47-010
Low volume pressure pump, 24 V

Product # Description 
14-02-002  Mercury pump-up float switch (NO) 
14-02-001  Mercury pump-down switch (NC) 
14-47-003  Shurflo Accumulator Tank, 2.2 USG 
14-47-004  Shurflo check valve 
14-47-001  Pump controller for 9325 

Linear Current Boosters
Maximize the output of any motor driven load using one of these high efficiency liner current boosters which increase output up to 40 % in reduced sunlight conditions. Each model covers 12 and 24 V systems with 15 and 30 V output.

Features:
• Weatherproof enclosure
• Voltage Limited Output
• Internal Fuse- 10 A/ 7 A automotive style fuse
• Transient Protected - input and output
• Float Switch input for on / off control

# 14-25-001 15 A
# 14-25-002 7A
Solar Converters - Linear current boosters




HES PV Toll Free: 1.866.258.0110