New Products

Matrix Energy now offers the MS Series Inverter/ Charger from Magnum Energy

Magnum Energy products
With over 70 years of combined inverter design and manufacturing experience, Magnum Energy has incorporated new design and manufacturing techniques to build some of the industry's most reliable and advanced inverter/chargers.
MS Series Pure Sine Wave  
Introducing the MS Series Inverter/Charger - a new pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. Install the MS Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.

The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use and UL 1741 for off grid installations.

MS Series Data Sheet
Magnum MS Pure Sine Inverter
2000 W, 12 V Inverter w/ 100 A PFC Charger
2800 W, 12 V Inverter w/ 125 A PFC Charger
4000 W, 24 V Inverter W/ 105 A pFC Charger
MS-AE Series Pure Sine Wave  
The unique design of the MS-AE Series can provide both 120 and 240 volt output simultaneously from one unit thus eliminating the need to stack two units to obtain a 240 volt AC output. The new MS4024AE uses 120/240 split phase input/output and has a continuous output rating of 4000 watts. The MS4024AE includes a 105 Amp PFC (Power Factor Corrected) Charger and is ETL Listed to the stringent requirements of UL1741 and certified to CSA C22.2 NO.107.1-01 for Renewable Energy installations.
MS-AE Series Data Sheet

Magnum MS-AE Series
4000 W, 24 V Inverter w/ 105 PFC Charger, 120/ 240 VAC
4000 W, 48 V Inverter w/ 60 A PFC Charger, 120/240 VAC
The ME-AGS-S Auto Generator Start controller can automatically start your generator based on battery voltage or inside temperature. Available as a stand-alone system. Starts most diesel or gas generators. Adjustable settings include: run time, start volts DC, start temp, quiet time, and 24 hour clock.

ME-AGS-S Data sheet
Magnum ME-AG-S
The ME-BMK Battery Monitor Kit gives you the “percentage of charge” for your battery bank. This monitor reports state of charge, real time amps, amp hours in/out, and minimum/maximum DC volts. The kit includes the sense module, sense and communication cables, and a 500 amp shunt.

ME-BMK Data Sheet
The ME-RC remote control provides convenient finger-tip operation, including the new one-knob programming. The ME-RC also has the option of controlling the ME-AGS (Automatic Generator Start) and the ME-BMK Battery Monitor Kit (requires revision 2.0 or higher remote) using a network connection to the inverter. This remote can be used with the ME, MS and MS-AE Series inverters to monitor inverter and charger status and to customize the inverter or charger programming parameters.

ME-RC Data Sheet
Magnum Charger Remote w/25 ft cable
Automatic Generator Start, 3 Relay, Stand Alone
Battery Monitor Kit w/ Shunt
Digital LCD Display Remote w/50 ft cable
Magnum E-Panel  
This enclosure provides the basic DC and AC over current protection and disconnects required for a proper code compliant system.

This E-Panel has been specifically designed for the Magnum Inverters. This white finished enclosure comes pre-wired and includes battery and by-pass breakers, bus-bars, shunt and hardware to mount the charge controller and inverter remote panel.
Magnum E-Panel MidNite Solar
  2.0 kW 12 V, Magnum E-Panel, Alum, White
  2.8 kW, 12 V, Magnum E-Panel, Alum, White
  4.0 kW, 12 V, Magnum E-Panel, Alum, White
  4.0 kW, 24 V, 120 / 240 VAC, Magnum E-Panel, Steel White